THE WEB CORNER, INC. · PRIVATE CONTINUING EDUCATIONCourse support
Course in developmentDraft — not yet TDLR approved. Not currently offered for renewal credit.
4-HOUR TEXAS ELECTRICIAN CONTINUING EDUCATION

One course.
Eight practical lessons.

Texas requirements. Electrical standards. Real jobsite decisions. Learn in focused lessons that fit around your workday.

Approval pending. The course is not currently available for renewal credit.

Electrician wearing a hard hat and safety glasses, holding a tablet at a jobsite
08Focused lessons
25 minPer lesson
200 minTotal instruction
40Knowledge checks
EXPLORE THE COURSE

A clear path from
Texas rules to real decisions.

Browse a few lessons at a time. Open “What you’ll learn” to see the focus of each lesson.

Lessons 01–03

Texas foundations

Start with licensing, Texas rules and navigating the electrical code.

0125 MIN

Texas Licensing and the Continuing-Education Framework

What you’ll learn
  • Identify which Texas electrical license types are subject to the four-hour CE requirement and the apprentice alternative.
  • Explain how the 50-minute CE hour produces a 200-minute four-hour course and how completion timing affects renewal.
  • Distinguish state licensing responsibilities from local permitting and inspection responsibilities.
  • Apply Texas rules on duplicate licenses, repeated courses, complete-course credit, and certificate retention.
Guided practice + knowledge check
0225 MIN

Texas Electrical Law, Rules, and Professional Compliance

What you’ll learn
  • Describe the relationship among Chapter 1305, Chapter 73, TDLR enforcement, and local electrical administration.
  • Recognize common contractor-facing compliance items involving proposals, invoices, advertising, vehicles, and records.
  • Use licensing exemptions cautiously and identify when the statute or TDLR should be consulted.
  • Explain how Texas adopts the NEC as the statewide technical baseline while allowing local administration.
Guided practice + knowledge check
0325 MIN

2026 NEC in Texas: Adoption, Navigation, and Change Management

What you’ll learn
  • State the current Texas-adopted NEC edition, effective date, and Texas-specific modification.
  • Use a disciplined code-navigation process instead of relying on remembered article numbers or prior-edition habits.
  • Explain why NFPA errata, TIAs, listings, manufacturer instructions, and local amendments can matter in addition to the base code text.
  • Apply edition and permit-date checks to realistic Texas installation scenarios.
Guided practice + knowledge check
Lessons 04–06

Technical decisions

Explore the systems and protective measures you work with on the job.

0425 MIN

Grounding and Bonding: Fault Paths, Electrodes, and Practical Verification

What you’ll learn
  • Distinguish grounding from bonding in practical electrical-safety terms.
  • Explain why an effective ground-fault current path supports operation of overcurrent protective devices.
  • Recognize key Article 250 decision points involving grounded conductors, equipment grounding conductors, bonding, and grounding electrodes.
  • Apply a systematic inspection approach to common grounding and bonding errors without relying on code-table memorization.
Guided practice + knowledge check
0525 MIN

Overcurrent Protection: Conductors, Equipment, and Coordination Decisions

What you’ll learn
  • Differentiate overload, short-circuit, and ground-fault conditions in the context of overcurrent protection.
  • Use Article 240 with conductor, equipment, listing, and application rules instead of sizing an OCPD from load current alone.
  • Recognize common field conditions that can defeat or compromise overcurrent protection.
  • Apply a documented decision process to replacement breakers, conductor protection, and available-fault-current questions.
Guided practice + knowledge check
0625 MIN

GFCI and AFCI Protection, Including the Texas 210.8(F) Modification

What you’ll learn
  • Explain the different hazard objectives of GFCI and AFCI protection.
  • Use current 2026 NEC location and circuit requirements when evaluating GFCI/AFCI protection rather than applying broad rules of thumb.
  • Accurately describe the Texas modification to NEC 210.8(F) for listed HVAC equipment.
  • Diagnose nuisance-trip complaints without defeating required protective functions.
Guided practice + knowledge check
Lessons 07–08

Safety & application

Bring the course together through safer work practices and jobsite scenarios.

0725 MIN

NFPA 70E Principles: Establishing an Electrically Safe Work Condition

What you’ll learn
  • Explain the hierarchy that favors establishing an electrically safe work condition over energized work.
  • Distinguish shock and arc-flash hazards and the role of risk assessment.
  • Describe the responsibilities of qualified persons, job planning, boundaries, PPE, and test-instrument verification at a high level.
  • Recognize when energized work requires formal justification and additional controls rather than convenience-based reasoning.
Guided practice + knowledge check
0825 MIN

Integrated Texas Jobsite Scenarios and Renewal Compliance

What you’ll learn
  • Integrate Texas licensing/rule, NEC, AHJ, listing, and NFPA 70E safety sources in a field decision.
  • Recognize when a familiar technical answer must be paused because the governing edition, permit, listing, or safety condition is unresolved.
  • Document a defensible correction path for common residential and commercial scenarios.
  • Describe the provider and learner steps that occur at course completion without confusing CE completion with technical authorization to perform work.
Guided practice + knowledge check
MORE THAN READING REGULATIONS

Learn it.
Work through it.
Put it to use.

Each lesson combines clear instruction with guided practice and a knowledge check. Your progress stays with your account.

Questions about the course? Read the FAQ

Clear instruction

Text lessons you can follow on your phone, tablet or computer. Audio and video appear when final lesson media is available.

Guided jobsite practice

Apply the material to practical decisions before moving to the next lesson.

Check your understanding

Five formative checks per lesson. No mandatory final exam in the current draft.

YOUR NEXT STEP

Make room for your next lesson.

Texas Electrician Continuing Education — Four-Hour Renewal Course · 0.9-draft-2026-10-03 · DRAFT.

The course is awaiting approval and cannot currently be used for Texas license renewal credit. Create your account now; credit enrollment opens after approval and launch requirements are met.

Create Your Account